Tools to open PC and its function.
 |
Flat Screwdriver
Function : A linear notch screwdriver that is used to tighten or loosen screws with different sizes.
Phillips Screwdriver
A cross or X head screwdriver that is used to tighten or loosen screws with different sizes.
Reversible T10 & T15 Torque Screwdriver
Function : A tool that is used to tighten or loosen nuts and bolts.
1/4" & 3/16" Nut Driver
Function : A tool that is used to tighten or loosen Hex nuts and bolts.
Solder Reel
Function : A tool to be molten by
solder iron so current can flow through.
Soldering Iron
Function : A tool to heat solder reel so it bond two wire together and current can flow
through.
6" Adjustable wrench
Function : A tool that is used to tighten and loosen hex nuts.
5" Long nose pliers
Function : A tool that is used to grips small object, crimps, cuts, crush and twist the wires.
8" Crimping tool / Wire Cutter
Function : A tool that is used to cut or stripe wire from insulator.
Reverse action tweezers
Function : A tool that is used to hold item
that is to be glued into small place.
Tweezer
Function : A tool that is use to pick up small object that cannot be picked by hands.
IC extractor
Function : A tool that is used to extract chip from the motherboard.
Three prongs holder
Function : A tool that is used to pick small
objects on the board.
IC Inserter (14-16 Pin)
Function : A tool that is used to insert chip into circuit board.
Spare parts tube
Function : A tool to store spare nuts and screws.
